The Flanders Scientific BM210 is a lightweight 21.5" Multi-Format broadcast monitor with 3G/Dual-Link/HD/SD-SDI, Component, Composite, & DVI-I Inputs. Like all BM series monitors this unit features full 12-bit video processing and a native 1920x1080 resolution 8-bit panel capable of reproducing over 16.7 million colors on screen. The BM210 offers support for virtually any signal format from NTSC/PAL to HD and 2K, including advanced 12-bit, 4:4:4, and XYZ signal formats. 

This unit features many broadcast monitor basics like a Blue Only Mode, Monochrome Mode, Markers, Safety Areas, H/V Delay, and Tally Lights. Like all Flanders Scientific monitors the BM210 also comes standard with advanced features like 18 Selectable Scopes, Focus Assist, Time Code Display, Audio Disembedding, Artifact Free Pixel Zoom, Adjustable Exposure Check, On-screen Alarms, and Advanced Pixel Level Measurement. This unit also provides additional advanced capabilities including live side-by-side monitoring of 2 inputs and dual LUT import capabilities (both look LUTs and calibration LUTs).
 

• Native 1920x1080 Resolution HD LCD Panel
• 12 Bit Video Processing, 8 Bit LCD Panel (16.7 Million Colors)
• Lightweight: 9 lbs (4.1 kg) without Stand, 11.2 lbs (5.1 kg) with Stand
• CFE2 Color Management, supports both look LUTs and calibration LUTs
• Simultaneous Viewing of Two Inputs, mixed formats supported
• Instantly Selectable Rec 709, EBU, SMPTE C, DCI P3, Native Gamut, and User Created Color Spaces
• Ultra-Low Power Consumption: 28W@120nit, 37W@250nit
• Standard 3Gbps SDI Inputs Included for Support of Advanced SMPTE 425M-AB Signals
• 4:4:4 YCbCr, RGB, & XYZ Signal Support
• Timecode Display (VITC 1, VITC2, LTC)
• Automatic On-Screen Indication of Source Frame-rate & Resolution (toggle on, off, or 5 second display)
• DSLR Zoom for Full Screen Scaling of DSLR Sources
• On-Screen Alarms (IRE Threshold, RGB Alarms, Loss of Signal, Audio Mute, and more)
• Adjustable Focus Assist (Focus Meter and Focus Highlight in Red)
• Wide Variety of Standard Markers & Safety Areas
• User Adjustable Custom Marker Feature
• Pixel Zoom Feature - Adjustable Artifact-Free Zoom On Any Portion of HD Signal
• CX Scale (video example): Full Screen and centered scaling of Codex ARRIRAW Recorder output
• Active Video Boundary Marker
• H/V Delay
• Blue Only Mode
• Monochrome Mode
• HD Anamorphic De-Squeeze (1.3x, 2.0x, 2.0xMag)
• AFD Reader
• Overscan/1:1 scan
• Freeze Frame Picture by Picture (Sub Window)
• 18 Quickly Selectable Scopes (Display Up to 2 at the Same Time)
• Luminance Waveform with Adjustable Intensity
• Vector Scope with Adjustable Intensity and Gain Expansion
• Hue Vector Scope with Adjustable Reference Vector
• Color Coded RGB Parade with Adjustable Intensity
• Color Coded GBR Parade with Adjustable Intensity
• RGB Overlay with Adjustable Intensity
• Column Scope Showing Min/Max YRGB Range
• Histogram, Color Histogram, & RGB Histogram Scopes
• YCbCr Scope with Adjustable Intensity
• YCbCr Overlay Scope with Adjustable Intensity
• Audio Phase Meter (Select Any Stereo Pair of Embedded Audio Channels)
• Audio Disembedding to Built-In Speakers or Audio Output
• 16 Channel Audio Level Meters
• Color Temperature Selection
• Gamma Selection (1.0~2.8) as well as C-Log and S-Log monitoring modes
• SD Aspect Ratio Selection (Anamorphic/4:3)
• Advanced Pixel Level Measurement Feature
• 3D Signal Analysis Modes for multiplexed Level B 3Gbps SDI signals
• Left Eye Only
• Right Eye Only
• Picture and Picture
• Horizontal Split with Adjustable Split Position
• Vertical Split with Adjustable Split Position
• 3D Disparity
• 3D Line by Line
• 3D Checkerboard with Adjustable Checkerboard Size
• *The BM210 is not a 3D display, these modes are strictly diagnostic modes for 3D signal analysis.
• Exposure Level Indication with LUM Coloring feature
• Remotely Controlled Tally Lights (Red/Green/Amber)
• Camera Record Status Indication triggered by Camera SDI Flag
• Ethernet Ready* (not ready at product launch, will be added via firmware in future)
• AC (100~240V) and DC (12V 4PIN XLR) Power Connectors
• Only 28 Watts Power Consumption
• Available with Optional AB or V-Mount Battery Plates
• Durable Aluminum Frame
• Compatible with FSI's Direct Connect Automatic Alignment as well as LightIllusion's LightSpace CMS

Flanders Scientific BM210

Screen Size:
21.5"
 
Picture Elements:
1920x1080
 
Inputs/Outputs:
Inputs
2 x BNC: HD-SDI - 3Gbps/Dual Link/HD/SD-SDI
1 x DVI-D: DVI-I (Analog/Digital)
1 x BNC: Composite
3 x BNC: Component (YPbPr/RGB)
1 x 3.5mm Stereo: Audio

Outputs
2 x BNC: HD-SDI - 3Gbps/HD/SD-SDI
1 x BNC: Composite
3 x BNC: Component (YPbPr/RGB)
1 x 3.5mm Stereo: Audio

Control Inputs/Outputs
1 x BNC: Ext. Sync Input
1 x BNC: Ext. Sync Output
1 x Ethernet: LAN
1 x Ethernet: GPI
1 x Ethernet: RS-485 Input
1 x Ethernet: RS-485 Output


Power Inputs/Outputs:
Inputs
1 x Anton Bauer Gold Mount (12V DC)
1 x C13: (120V AC)
1 x 4pin XLR: (12V DC)

Power Requirements:
100-240VAC - 50/60Hz
11-17VDC
 
Power Consumption:
DC Power Consumption Approximately 28 Watts
 
Dimensions (WxHxD):
20.5" x 13.5" x 2.1" (Without Stand)
 
Weight:
9 lbs

21.5" Flanders Scientific BM210 (1920 x 1080) Monitor

• Anton Bauer Gold Mount
• A/C Cable
• 12v 4-Pin XLR Power Cable
• 4-Port P-Tap Splitter
• (3) Piece Hood w/Bag
• Baby Pin Receiver Stand Bracket
• (2) 50' BNC Cable
• BNC Barrel
• Case